PRiMO
The first full electric, self-levelling, tracked telescopic boom with electric drive, powered by fully removable battery power packs.
Designed to eliminate jobsite obstacles, with an 18m working height, it can safely be driven up to 14m and on 15° lateral and longitudinal inclination, drastically enhancing operator efficiency, productivity and safety.
Full electric with a completely removable power pack
Infinite autonomy with our fully removable Power Pack, integrated forklift pockets, a new and innovative power option. Each unit can be easily substituted if you use our equipment on a heavy-duty job, or simply take the power unit off-site for recharge.

Choose between interchangeable AGM or Lithium battery packs! The Jibbi 1890 PRiMO automatically recognizes the power unit and starts using it.

New controller
Completely reimagined controller for a streamlined user experience based on industry-accepted standards and rental sector needs. It features a standard Anti-Entrapment bar and comfortable joysticks.

Anti-Entrapment System
The AES anti-entrapment system is designed to prevent serious injury by stopping the unit when the operator is crushed against it. Our innovative system furthermore will go back on its trajectory for 3-5 seconds allowing space for the operator to safely remove himself.

Ultrasonic Anti-Collision System
The UAS sensors safeguard the aerial and travel operations by monitoring the area in front and behind the tracks, on the tail swing, and above and below the basket, preventing collisions with obstacles and offering pothole and drop-off protection. This is an optional kit that can be ordered on the Jibbi 1890 PRiMO.

ATS – Automatic Tensioning System
The ATS zero maintenance track tensioning system is directly connected to and controlled by the main hydraulic system. The tracks are automatically tensioned and require no greasing or maintenance.

Optional extra kits:

Work Lights Kit – an option for work lights positioned on the front and back of the undercarriage and around the basket.
Arctic lubricant for cold climate

THE 16 M TELESCOPIC SELF-PROPELLED VEHICLE WITH LITHIUM BATTERY
Conceived and designed for use both indoors and in open spaces where low sound and exhaust emissions are required, the JIBBI 1670 LTH is a 16 m Self-propelled Crawler Boom equipped with a 300Ah-48V lithium battery.

Thanks to the consolidated dynamic and proactive levelling system that characterises the Almac aerial platforms, with the JIBBI 1670 LTH crawler lift the operator can work safely and confidently on uneven ground and in areas with steep slopes up to 22° (40%) during movement operations in transportation conditions.

Features and benefits of the new Almac crawler self-propelled vehicle
As for the version of the 1670 EVO telescopic crawler aerial platform, the LTH self-propelled vehicle differs from the other models of the JT series with:

a maximum working height of 16 m
an operating reach of 8.5 m
the possibility for the operator to travel up to a moving height of 9.8 m
for a variable undercarriage that has different track opening configurations to enable work in confined spaces (operating track widths: 1.35 m, 1.90 m, 2,20 m and 2.45 m)
The standard version of the 1.4 m wide basket (designed to remain in shape in the passage width of the machine) offers an alternative that promotes operator comfort, that is, a 1.8 m wide basket. Both versions of baskets of the JIBBI 1670 LTH aerial platform are able to rotate +/- 70° guaranteeing a maximum capacity of 230 kg.

The Almac new telescopic self-propelled vehicle is not only equipped with a 300Ah-48V lithium battery but also with 2 20Ah-48V battery chargers, which allow rapid charging in just 6 hours. Due to its characteristics, this machine is particularly suitable for operating indoors, outdoors and in sensitive areas, such as: hospitals, shopping centres, industries, residential areas, urban construction sites, historic centres and churches.

Almac technologies to guarantee safety at height
The JIBBI 1670 LTH, like all the other models in the range, features a series of technologies aimed at increasing operator safety at height:

DWP -Dynamic Working Performance, for dynamic management of the machine’s performance based on three different work parameters, i.e. the slope of the ground, the width of the retractable crawler undercarriage and the load of the basket, resulting in correct position of the machine at all times
Safe-Lock System, which prevents the crawler from escaping from the tensioning wheels (subjected to patent request)
Ultrasonic anti-collision system, which protects operators against sudden and accidental impact in the basket with an anti-crush barrier function on the two sides of the basket (in the top and bottom part)
Optional equipment for the crawler self-propelled vehicle JIBBI 1670 LTH
The optional different customisations offered by Almac with respect to the standard set-up include:

Large basket (8 x 0.7 m)
Non-marking tracks
Electric pump 220V-2.2Kw / 50Hz (Weight +30 Kg)
Radio remote control with rechargeable battery
Lubricant kit for Arctic climate
200 kg winch kit

THE SELF-PROPELLED CRAWLER WITH TELESCOPIC BOOM AND LITHIUM BATTERY
Within the new JT-LINE series, AlmaCrawler offers JIBBI 1250 LTH, a self-propelled crawler with cutting-edge technologies. Like all company machinery, it is equipped with the patented bi-levelling system, which allows for automatic levelling at a height, even on steep slopes or uneven ground.

Zero emissions and much more: why you should choose the lift
Equipped with a 300 Ah-48 V lithium battery, JIBBI 1250 LTH eliminates emissions and allows you to work in complete safety both indoors and outdoors. However, the advantages it offers are not only these. In fact, this self-propelled machine features a crawler undercarriage with variable track gauge, retractable from 1.95m to 1.15m and it reaches a working height of 12.2m, with a maximum front outreach of 7m and a maximum lateral outreach of 5.4m. The basket has a high maximum capacity – 230kg with 2 operators – and it is equipped with an ultrasonic anti-collision system, to protect the operators in the basket, which acts as an anti-crushing barrier on both sides (in the upper and lower part). The specifications described above, in addition to making the model in question extremely versatile, are the basis of many other advantages, such as:

Operation without exhaust gases and emissions
Ease of use
Energy savings
Fast charging
No battery maintenance
One self-propelled machine, many applications: the areas of use
The specifications of the basket, the undercarriage with variable track gauge and all its other characteristics make JIBBI 1250 LTH a self-propelled machine suitable for a large number of professionals and areas of use. Thanks also to its lithium battery, the machine can be used for different applications in the following spaces:

Indoor environments

Hospital facilities
Shopping centres
Factories
Outdoors and interventions in sensitive areas (with emission restrictions)

Residential areas
Urban construction sites
Historical centres
Churches
The equipment available for the machine
AlmaCrawler’s main aim is to meet its customers’ needs and to allow the end user to work with vehicles suitable for different contexts. To achieve this type of result, without ever renouncing performance and safety, the company offers the possibility to request different customisations for the self-propelled machine JIBBI 1250 LTH, such as the optional equipment described below:

Non-marking crawler
200 kg winch kit
Radio remote control kit
Lubricant kit for arctic climate

THE SELF-PROPELLED TELESCOPIC CRAWLER WITH DYNAMIC BI-LIVELLING SYSTEM
Between the machines of last innovative JT series of Almac, it’s available the self-propelled boom JIBBI 1250 ELC. This model is similar to the JIBBI 1250 EVO, to except for engine, that in this case is total electric.

As all the other AlmaCrawler range, this JIBBI version is equipped with automatic levelling technology (Dynamic and Proactive), which allows to operate on rough terrain and / or on steep slopes.

Why choose it: differences and similarities with the EVO model
Through an in-depth study of the needs of its customers, Almac develops constantly innovative systems of lift and handling. This productive philosophy it allows the company to propose an efficient electric self-propelled boom. Equipped with an Lead acid battery pack 420Ah-48V, the JIBBI 1250 ELC have a 7 hours working autonomy (rechargeable battery maximum travel: 1600mt).

As well as EVO version, there are some functional optionals aimed at increasing the operator safety:

DWP – Dynamic Working Performance, dynamic control of the performances of the machine accordingly to the working conditions (subject to patent request)
Safe-Lock System, prevention system on the exit of the tracks from the tensioning wheels (subject to patent request)
Fast connected Winch Kit (maximum capacity 200kg) that can be easily installed to transform the Jibbi in a small articulated crane machine providing a great versatility in the daily applications.
New Anti-collision Ultrasonic System, for protecting the operator as an anticrushing barrier on both sides of the basket (in the upper and lower part);

What are the available optional?
To be able to satisfy their customers’ necessities, Almac proposed a broad range of optional for the JIBBI 1250 ELC. In addittion to winch kit, there are some accessories made available to company:

Non-marking tracks
Radio remote control
Arctic lubricant for cold climate
Contexts of use:
The features and optionals mentioned so far, make the ELC version a self-propelled crawler suitable for operating both indoors and outdoors and in areas where low sound emission is required, such as:

Hospitals
Schools
Urban and extra-urban parks
Residential areas
In addition, with Non-marking tracks, you’ll have a possibility to operate on sensitive surfaces like a lawns and interior floorin, without leaving imprints.